Addco K1-175-0U Front Anti-Sway Bar Kit: 1-1/4 inch Diameter Bar

Any one who owns a 99-04 Jeep Grand Cherokee (WJ) should upgrade their rear sway bar and front to match the rear. If you take one look at the stock 1/2 or 9/16 rear anti-sway bar, it looks like you can bend it with your foot! Very easy install; remove the old one from your end links and axle, grease your bushings, bolt the new one up, test drive and enjoy!! Jeep handles much better and safer. I installed both front and rear to get the most out of it. You will notice the biggest difference in the rear. The front one does not come with longer bolts for your front end links. With the larger sway bar, the stock bolts are a little short. They can work but another 1/4 is needed to get the crush nut to properly lock. Once again, great product and great service from fasttrackautoparts.com

I installed this sway bar on my 2001 Jeep Grand Cherokee and works very well.The jeep leans mutch less than with the original bar.The only thing that the manufacturer should have done is to include a little longer bolt for the bar to link connection.The addco bar is also thicker at this point.

I've had this swaybar on for 2 years now and what a differance it's made. I also recommend the rear swaybar, it's worth the money. One helpfull hint reuse the stock bushings for the front swaybar. I can't feel any differance in handling between the stock or the urathane bushings.Also it's almost impossible to get a greese gun into where the bracket is and the urathane bushings squek so loud it will drive crazy. A great product.